About The Recorking Of Old Wines

Basically you should have any old wine recorked about every thirty to forty years. Francisco Albuquerque, the oenologist and quality control manager of the Madeira Wine Company, even thinks that recorking should be done every fifteen years. Anyway, it is best to have a professional do this for you. There are some mistakes easily to be made that can lead to the complete loss of the wine. So, only do this if you can find nobody else. Also it has to be said, that if you want to keep an old bottle as a financial investment, you should have this bottle recorked by a well-known reliable pro. If you do the recorking yourself, the financial value of the bottle will go down since it is not “original” anymore and you have no proof of the authenticity of the wine inside.

The following text describes how I do it, it is neither the perfect reference method, nor is it fool-proof. Until writing these lines, I have recorked about fifteen old bottles so of course my experience is limited. On the other hand, until now I have never lost a bottle and the recorked bottles are doing fine so far, the first being recorked in 1998. During this time I have tried several new things and dropped some old ones; I am still learning. Please read the complete text several times and make sure you understand it in detail before you recork any precious old bottle! If you have any questions fell free to email me and ask me in detail.

Warning: Do none of the following procedure with any hand-blown or very old manufactured bottles. These bottles crack so easily, that you should not take the risk of recorking them. (How do you know if a bottle is hand-blown or manufactured? Please refer to the chapter about old bottles!)

You need a number of things to recork an old bottle. Do not use these items for anything else, as they might give off some strange odors to the wine. Some of these items you will have to buy at a special shop, most things will be found in the kitchen. Corks, handcorking machine and sealing wax might be found at your local winery, or using the internet. Feeding the usual search-engines will give you the needed shops that sell everything for home-brewing and associated activities. Before using these items, wash them with very hot water, do not use a detergent, and let them dry on a clean towel.

You will need the following items:


All the necessary things

Try having someone to help you, it makes the following a lot easier and it is more fun too.

24 hours before starting the recorking procedure the corks are put into cold water. It is important that the corks are drowned completely. Put two or three spare corks in, they can be dried afterwards and used again.

Next day, the fun starts with the "peeling" of the bottle. Use the table spoon to carefully hammer the old sealing wax from the bottle, very much like peeling an egg. With the knife you can scrape remaining wax away. The cork should be completely clean from wax. If the bottle is very old, the procedure of peeling it can result in a crack or even in breaking the bottle. So use the alternative method: “shave” the bottle with a rather sharp and stable knife.


Peeled cork

The cork is then removed with a corkscrew. Put the cork aside, it will not be reused, but can give you some clues on how the wine was stored.

If you want to put a little wine aside for later tasting, this is the time! But remember that Madeira takes some time to open up, after a long time in the bottle. I usually take a sip at once, then two or three hours later to get an impression of how the wine is opening up.

The glass balls are put into the drinking glass, the glass is then filled with rectified spirit. Put a saucer on the top to keep the spirit from evaporating to fast.


Glass balls

The glass balls are put on the towel, the rectified spirit will quickly evaporate from the glass balls. With the teaspoon you put as much glass balls into the bottle as necessary to bring the level of the wine back to normal. One to two thumbs under the cork is a good level.


Glass balls in the bottle

Dip the wet cork into the rectified spirit and put the wet cork into the handcorking machine. Your helping hand secures the bottle with one hand. The corking machine is put on top of the bottle. The correct position on the bottleneck is secured with the second hand. Now it is your turn. It is essential that the cork is pressed into the bottle with one fast motion. Coming out of the handcorking machine, the cork has been pressed together by the machine and is now reduced in diameter. So when entering the bottle, the air inside the bottleneck can move along the cork to the outside. If this is done too slowly, the cork will expand too early, the air from the bottleneck will be trapped and the pressure in the bottle will rise to dangerous levels! A bouncing cork will be the best result; a broken bottle will be the worst! You better practice this before! So do this quick and with some power. The cork should go in for at least three fourths; any remaining cork outside the neck can be cut off with a sharp knife. Again: Do not recork any hand-blown bottles, it is just too risky!

Let the cork dry for fifteen minutes and wipe the bottleneck with some rectified spirit to ensure a good contact with the sealing wax.

The sealing wax can be heated in a tin cup on a camping stove; I prefer an old cup and the microwave. Choose a medium setting and watch the wax carefully, it melts faster than you think. (Rule of thump: a full cup of sealing wax powder takes about 5 minutes at 700 watt to melt) When the wax is completely melted, take the bottle upside down and dip it into the wax, until the neck is covered for about two thumb's widths and pull it out in a quick motion. The wax takes about one minute to harden again, if you use your own seal, you can press it into the wax now. The remaining sealing wax can stay in the cup for the next time. Do not seal any hand-blown or very old manufactured bottles. Old glass can not stand sudden changes in temperature and is very likely to crack when you dip the bottle neck into the hot wax! If you really want to be on the safe side, gently warm the bottle neck with a hairdryer before sealing it. This lessens the difference in temperature and should reduce the risk of cracks.


Sealing

The complete procedure takes about thirty minutes per bottle.